Clear Vinyl Transfer Tape with Grid | 30 cm Wide

Keep the spacing of a weeded adhesive-vinyl design together as you lift it from its backing and position it on a compatible surface. This clear PVC transfer tape has a printed alignment grid and is described by the supplier as medium tack.

Roll sizes

• 30x100cm: 30 cm wide × 1 m long.
• 30x500cm: 30 cm wide × 5 m long.
• 30x1000cm: 30 cm wide × 10 m long.
• 30x1500cm: 30 cm wide × 15 m long.

Each option is one roll. The supplier option labels appear under Color, but identify roll dimensions rather than different colors.

What is transfer tape for?

Transfer tape temporarily holds the parts of a cut-and-weeded adhesive-vinyl design in position. It is removed after application; it is not the decorative vinyl itself and is not a permanent protective laminate.

Will it work with every vinyl?

No universal compatibility is established. Try a small sample with your exact film and surface first. Textured, specialty and heat-transfer materials may require a different carrier or tack level. Follow the vinyl manufacturer’s instructions rather than assuming a stronger pull is the solution.

Before applying a design

Check that all unwanted pieces have been weeded, keep the adhesive clean, and work on a supported flat surface. Use the grid as a placement aid while checking the design against the actual destination. Do not use this tape as automotive paint-protection film, window tint or heat-press carrier film.

Practical guide

Why Transfer Tape Won't Pick Up Adhesive Vinyl