Chevrolet Avalanche Rear Trunk Side Decals | Vinyl Truck Graphics 2-Pack
Tired of your Chevrolet Avalanche blending in with every other truck in the parking lot? The Avalanche has one of the most distinctive rear quarter profiles ever stamped onto a pickup — and it deserves graphics that actually accentuate that body line instead of fighting it. This 2-piece rear trunk side decal kit is cut specifically for the Avalanche's rear panels, giving you a sport-styled finish that looks factory-aggressive without the cost or commitment of a full vinyl wrap.
Order Now →
What Is the Rear Trunk Side Decal for Chevrolet Avalanche?
This is a precision-cut, two-piece vinyl decal kit engineered for the rear quarter and bed-side panels of the Chevrolet Avalanche. Each panel measures roughly 47.2 inches long by 4.7 inches wide and follows the natural contour of the Avalanche's iconic rear body line. It's not a generic strip you have to trim and align by eye — it's a pre-cut graphic that drops into place on either side of your truck.
The kit is made from automotive-grade PVC vinyl with a UV-resistant top layer, meaning it won't fade, crack, or peel after a few months of Texas sun or Midwest winters. Because the Avalanche's rear quarter has a unique shape that no other GM truck shares, off-the-shelf universal stripes never look right. This kit is cut for that body — so the lines stay parallel to your factory creases and finish flush with the panel edges.
Key Benefits
- Avalanche-specific fitment — cut to follow the truck's rear quarter contour, not a generic shape
- Durable PVC vinyl — UV and weather resistant, built for years of daily driving
- Complete 2-pack — left and right panels included, both sides of your truck covered
- Adds sport-style aggression — instantly transforms the rear profile without paintwork
- Easy DIY installation — squeegee-friendly adhesive backing, no special tools required
- Removable — peels cleanly when you're ready for a new look or resale prep
Why Your Chevrolet Avalanche Deserves This Protection
The Avalanche's rear quarter panels sit right in the firing line of road spray, tire kickback, and parking lot dings. Anyone who's owned one knows those lower panels collect rock chips, sun fade, and the inevitable scratch from loading gear into the bed. A quality vinyl graphic doesn't just look good — it adds a sacrificial layer over the most abuse-prone real estate on the truck. When the decal eventually wears out, the paint underneath stays untouched.
If you're already thinking about protecting the rest of your Avalanche, this is a smart starting point. Pair it with clear bra protection up front, and you've got both visual upgrade and real-world automotive protection. Want to see what else works for trucks? Check out our full vehicle decals collection or browse our best sellers for the most-loved kits from other truck owners.
What's Included & Installation
You'll get two pre-cut PVC vinyl panels — one for the driver side and one for the passenger side — along with the adhesive backing ready to apply. Installation is straightforward: clean the panel thoroughly with isopropyl alcohol, dry it completely, peel the backing, align the decal along your factory body line, and squeegee out any air bubbles working from the center outward. A heat gun or hair dryer helps the vinyl conform to curves.
Most Avalanche owners handle this in under an hour in a garage or shaded driveway. If you'd rather have it done by a pro, any local detail or wrap shop can install it in 30–45 minutes for a clean, bubble-free finish.
Complete Your Build
Got a Super Duty in the driveway too? These door stripes deliver the same sport-styled lift.
Order Here →
Same sport-styled treatment cut for the Tacoma — perfect if there's a TRD in the family.