Tired of your Chevrolet Colorado looking smaller and softer than the full-size trucks rolling next to it at the light? The mid-size Colorado has the muscle and the stance — it just needs the visual weight to match. A bold lower-body stripe is the single fastest way to stretch the truck's silhouette, anchor the door line, and give the whole profile a meaner, more aggressive read. That's exactly what this 2-piece door side skirt stripe decal does — at a price that beats a custom shop wrap by hundreds.
Order Now →
What Is the Door Side Skirt Stripe Decal for Chevrolet Colorado?
This is a 2-piece precision-cut vinyl graphic designed to run the full length of your Colorado's lower door and rocker panel area — one stripe per side. Each panel measures approximately 78.7 inches long by 5.1 inches wide, sized to follow the natural body line of the Colorado from the front wheel arch back through the rear door. The result is a clean, continuous stripe that visually drops the truck's stance and adds purpose to the side profile.
Unlike generic "universal" stripes that you have to trim and guess at, this kit is shaped for the Colorado's specific door and skirt geometry. The vinyl is automotive-grade PVC with a UV-stable, weather-resistant topcoat, so it holds up to sun, rain, car washes, and the daily grind without fading, lifting, or yellowing. Think of it as a styling upgrade and a layer of light surface protection in one — covering the lower panels that take the most door-ding and shoe-scuff abuse.
Key Benefits
- Model-specific fitment — Designed for the Chevrolet Colorado across all trims and model years, so the stripe lines up with your door cut and skirt edge instead of looking aftermarket-sloppy.
- Premium PVC vinyl — UV and weather resistant, with a finish that resists fading, cracking, and peeling through years of sun and seasons.
- Full-length coverage — Approximately 78.7 in. L x 5.1 in. W per panel runs the entire door and skirt, eliminating the chopped-up look of multi-piece kits.
- Adds visual length and stance — A horizontal lower stripe makes the mid-size Colorado read longer and more planted, closer to the visual mass of a 1500-class truck.
- Light surface protection — The vinyl shields the lower door and rocker paint from minor scuffs, light scratches, and parking-lot abuse.
- DIY-friendly install — Pre-cut shapes mean no measuring, no template work, and no expensive shop fees if you've got an afternoon and a squeegee.
Why Your Chevrolet Colorado Deserves This Protection
The Colorado's lower doors and rocker panels live in the worst real estate on the truck. Rocks kicked up from the front tires, road salt in winter, sand on job sites, shoe scuffs from climbing in and out — that lower band of paint takes punishment that the rest of the truck never sees. Over a few years, that's where you'll spot the first chips, swirl marks, and dulled clear coat. A full-length vinyl stripe puts a sacrificial layer right where the damage happens, and it looks intentional doing it.
Style-wise, the Colorado has clean, modern body lines that respond well to graphic emphasis. A lower stripe lengthens the visual, drops the eye, and ties the front and rear arches together — exactly the trick Chevy uses on its own ZR2 and Trail Boss trim packages. If you like this look and want to keep building the truck, browse our full vehicle decal collection for matching hood, bed, and tailgate graphics, or check out our best sellers to see what other truck owners are running right now.
What's Included & Installation
The kit ships with two pre-cut vinyl stripe panels — one for the driver side and one for the passenger side — each approximately 78.7 inches long. Everything is shaped and sized for the Colorado, so there's no trimming guesswork.
Installation is straightforward: wash the lower doors and rockers thoroughly, wipe down with isopropyl alcohol, dry completely, then peel and apply using a squeegee to push out air bubbles as you go. A light mist of soapy water on the panel gives you a few seconds of slide time to align the stripe before it sets. Most owners finish both sides in about 45–60 minutes. If you'd rather not handle it yourself, any local wrap or detail shop can install a pre-cut kit in well under an hour.
Frequently Asked Questions
Will this fit my year and trim of Colorado?
Yes — this kit is designed to fit the Chevrolet Colorado across all trims and model years. The stripe follows the door and lower skirt line that has remained consistent across Colorado generations.
How long does the vinyl last?
With proper installation and normal care, the PVC vinyl will hold up for several years of daily driving. The UV-resistant topcoat prevents fading, and the adhesive is engineered for exterior automotive use through heat, cold, and wash cycles. Avoid pressure-washing directly at the edges for the longest life.
Can I remove it later without damaging my paint?
Yes. Vinyl decals like this are designed to be removable. Warm the stripe gently with a heat gun or hair dryer and peel it back at a low angle. Any leftover adhesive lifts easily with an adhesive remover, leaving your factory paint untouched — which is great for resale or if you decide to change up the look.
Looking for More Truck Styling Upgrades?
If you're building out a complete look, check out these popular truck graphics from other owners:
Back Door & Side Decal for Dodge RAM 1500 / 2500 HEMI Rebel 5.7L — Bold rear and side graphics for RAM owners.
Order Here →Splash Grunge Body Side Decal for Toyota Tundra — 3-piece kit for TRD, Limited, SR5, and Platinum trims.
Order Here →Hood Stripe Style Decal for Ford F-150 / Ranger Raptor — Aggressive hood graphic for Ford truck owners.