Claw Style Truck Bed Decal for Ford F-150 / Ranger Raptor — Bold Vinyl Graphics 2-Pack
Your Ford F-150 or Ranger Raptor has the attitude — does its bed side show it? Stock truck panels are wide, flat, and forgettable, especially from the side profile that everyone sees in parking lots, on the highway, and at the trailhead. If you've been hunting for a way to add aggressive visual identity without dropping four figures on a wrap, a precision-cut claw graphic is the cleanest, fastest upgrade you can make. This 2-piece claw style decal kit is built specifically for Ford pickups — printed on UV-stable PVC vinyl and ready to install in an afternoon.
Order Now →
What Is the Claw Style Truck Bed Side Decal for Ford F-150 / Ranger Raptor?
This is a 2-piece vinyl graphic kit — one decal for the driver side, one for the passenger side — designed to span the bed panel of the Ford F-150, Ranger, and Raptor. The artwork is a cartoon-inspired "claw scratch" design that mimics the look of something tearing through the sheet metal, giving your pickup an off-road, predatory presence that pairs perfectly with the Raptor lineage.
Unlike generic universal stickers that arrive on a single sheet and force you to trim, align, and pray, these graphics are sized and shaped specifically for the F-150 and Ranger bed proportions. That means the claw lines flow naturally with the body lines of your truck instead of fighting them.
The vinyl itself is UV-stable PVC — the same material category used in professional automotive decals — so it resists fading, cracking, and lifting through hot summers, freezing winters, and daily highway abuse.
Key Benefits
- Vehicle-specific fitment: Cut and proportioned for the Ford F-150, Ranger, and Raptor bed panels — no awkward trimming or guesswork.
- UV-stable PVC vinyl: Resists sun fade, weather damage, and minor stone chips so the graphic looks fresh for years.
- Complete 2-piece set: Includes both driver and passenger side decals — mirrored to keep the truck balanced from every angle.
- DIY-friendly install: Peel, position, squeegee. Most truck owners finish both sides in under an hour with basic tools.
- Removable when you're ready: Quality vinyl lifts cleanly with gentle heat, leaving factory paint untouched — great for lease returns or resale.
- Massive style impact for under $20: A fraction of the cost of a partial wrap, with a visual punch that turns heads.
Why Your Ford F-150 or Raptor Deserves This Upgrade
The Ford F-150 and Ranger Raptor are built for work, play, and presence — but the factory bed sides are intentionally minimal. That blank canvas is fine if you want stealth, but most owners want their truck to look as capable as it actually is. A claw-style decal gives the bed visual movement and ties the truck's profile into its aggressive front fascia and flared fenders. It transforms a daily driver into something memorable.
There's also a practical layer to graphics like these: vinyl sits on top of your clear coat, taking the first hits from sand, gravel, and brush scrapes that would otherwise scratch your paint. While it's not a substitute for true paint protection film, it adds a sacrificial layer in a high-impact zone. If you're serious about long-term paint care, pair it with PPF on the rocker panels and lower bed edges — browse our full PPF Kits collection for vehicle-specific clear bra options, or explore all our vehicle decals to keep building the look.
What's Included & Installation
Your order includes two pre-cut claw graphic decals — one for each side of the bed — printed on automotive-grade PVC vinyl with adhesive backing. Installation requires only basic supplies you likely already have: isopropyl alcohol, a clean microfiber, a squeegee or hard plastic card, and a heat gun or hair dryer for tricky curves.
The process is straightforward: clean the bed panel thoroughly, dry it completely, position the decal with masking tape to mark alignment, peel the backing, and apply with steady squeegee strokes from the center outward to push out air. Heat the edges gently to lock them down. If you'd rather not DIY, any local sign or wrap shop can apply both sides in about 30 minutes.
Complete Your Build
Running a Super Duty too? Match the aggressive look with door-side stripes built for heavy-duty Ford pickups.
Order Here →