Your Ford Ranger T6 or XLT already has the right stance, the right attitude, and the capability to back it up — but stock body panels can leave it looking like every other Ranger in the parking lot. Want to give it some personality without dropping thousands on a full vinyl wrap or custom paint job? A precision-cut body side graphic is the fastest, cleanest way to transform the look of your truck in a single afternoon.
Order Now →
What Is the Ford Ranger T6 / XLT Body Side Decoration Graphic Decal?
This is a 2-piece matte vinyl decal set engineered specifically for the body side panels of the Ford Ranger T6 and XLT. Rather than a generic strip you have to trim and second-guess, this kit is shaped to follow the natural body lines of the Ranger — making installation straightforward and the finished result genuinely OEM-quality.
The graphic itself uses a matte PVC vinyl with a UV-stable, chip-resistant finish. That means it stands up to sun exposure, jobsite dust, gravel kickup, and the everyday abuse a working truck takes. You get one piece for the driver side and one for the passenger side — full coverage along the lower body, applied directly to your factory paint.
Because it's purpose-built for the Ranger T6 and XLT platforms, you skip the universal-fit guessing game. The decal lays flat, follows the contours, and finishes cleanly at the edges instead of awkwardly hanging off a fender or sitting crooked along a swage line.
Key Benefits
- Vehicle-specific fitment — cut precisely for Ford Ranger T6 and XLT body panels, no trimming or universal-fit headaches.
- Matte PVC vinyl construction — premium automotive-grade material with a low-sheen finish that looks aggressive without going overboard.
- UV-stable and chip-resistant — built to handle sun, heat, gravel, and weather without fading or peeling at the edges.
- 2-piece complete kit — both driver and passenger sides included, ready to install out of the box.
- DIY-friendly install — a confident first-timer can lay this down in an afternoon with basic tools and a steady hand.
- Paint protection bonus — covers the lower body where rock chips and scuffs normally take their toll, helping preserve resale value.
Why Your Ford Ranger Deserves This Upgrade
The Ranger's lower body panels take more abuse than almost any other surface on the truck. Gravel roads, parking lot door dings, jobsite debris, salt spray, and constant UV exposure all chip away at the factory finish over time. Once paint starts chipping along the lower doors and rocker area, the rust clock starts ticking — and touch-up paint rarely matches well enough to hide the damage.
This decal does double duty: it adds a custom, purpose-built look while shielding the most vulnerable strip of paint on your truck. If you're already thinking about long-term automotive protection, pair it with a clear bra or pre-cut PPF kit on the hood and bumper from our PPF Kits collection, or browse the full vehicle decals lineup to coordinate hood stripes, tailgate graphics, and trim accents to match.
What's Included & Installation
The kit ships with two pre-cut matte vinyl decals — one for each side of your Ranger. Installation is straightforward: wash the body panels thoroughly with soap and water, follow up with isopropyl alcohol to remove any wax or residue, and let the surface dry completely. Use a spray bottle with a few drops of dish soap and water to wet-apply the decal, position it along the body line, then squeegee from the center outward to push out air and water. Peel the transfer tape slowly at a sharp angle, and finish with a heat gun or hair dryer on low to seal the edges.
Plan on 60–90 minutes per side if it's your first time. If you'd rather hand it off, any local vinyl or window-tint shop can install it in under an hour — usually for a modest labor fee.
Frequently Asked Questions
Will this fit my specific year of Ford Ranger?
This kit is designed for the Ford Ranger T6 and XLT body styles. If you're unsure whether your model year matches, send us a quick message with your year and trim before ordering and we'll confirm fitment.
How long does the matte vinyl last on the truck?
With proper installation and basic care — hand washing, avoiding high-pressure jets directly on the edges — you can expect 5–7 years of solid service life. The UV-stable material resists fading, and the chip-resistant surface holds up well to highway and light off-road use.
Can I remove it later without damaging the paint?
Yes. Quality vinyl decals are designed to come off cleanly when warmed gently with a heat gun or hair dryer. As long as your factory paint is in good condition underneath, there's no residue or damage left behind — which makes this a worry-free upgrade if you ever decide to sell or change the look.
Complete the Look
If you're styling out your Ranger, you might also like our Hood Stripe Decal for Ford F-150 / Ranger Raptor to tie the front end into the body side graphics. Driving something else? Check out the RAM 1500 / 2500 HEMI Rebel Decal or the Toyota Tundra Splash Grunge Kit. You can also browse our Best Sellers for the most popular truck and SUV graphics on the site.
At $34.99, this body side graphic delivers custom-truck looks, vehicle-specific fitment, and real protection for the most chip-prone panels on your Ranger — all without the cost or commitment of paint or a full wrap. It installs in an afternoon, lasts for years, and peels off cleanly whenever you're ready for the next look. If you've been waiting to make your Ranger T6 or XLT stand out, this is the easy win.