Your Ford Ranger has presence — that wide stance, the boxed bed, the unmistakable Ranger silhouette. But take a look at the back. The tailgate is the biggest flat panel on your truck, and on most Rangers, it's just… blank. Every car behind you at a red light gets a front-row view of a plain stamped panel. If you've been searching for a clean, factory-looking way to finish off the rear end of your truck without committing to a full wrap or expensive paint job, this is it.
Order Now →
What Is the Ford Ranger Trunk Tailgate Custom Graphic Decal?
This is a large-format vinyl decal designed specifically to cover the tailgate area of the Ford Ranger. Measuring approximately 61 inches long by 13 inches wide, it spans the rear panel and delivers a clean, intentional look in a matte finish. The graphic is printed on durable PVC vinyl with UV-resistant ink, so it won't fade after a few months of Texas sun or Florida humidity.
Unlike generic universal stickers, this decal is sized and shaped with the Ford Ranger in mind — all model years and trims. That means the proportions land where they should, the graphic sits flush against the panel contours, and you don't end up trimming and guessing. It's a finishing piece designed to make your Ranger look like it rolled out of a customization shop, not off the lot.
Key Benefits
- Ford Ranger specific sizing — 61" x 13" dimensions sized for the Ranger tailgate, not a one-size-fits-all sticker that needs hacking.
- UV-resistant PVC vinyl — Holds color and finish through years of sun, rain, and heat without yellowing or peeling at the edges.
- Clean matte finish — Modern, aggressive look that pairs with stock paint and aftermarket accessories alike. No cheap gloss shine.
- Protects factory paint — Acts as a barrier against minor scratches, tailgate scuffs, and the wear that comes from loading gear into the bed.
- DIY-friendly install — Apply at home with basic tools in an afternoon. No body shop trip required.
- Removable — Comes off cleanly when you're ready for a change or before resale, with no damage to underlying paint.
Why Your Ford Ranger Deserves This Protection
Truck tailgates take a beating. They get bumped by shopping carts, scraped by sliding cargo, peppered by gravel from the truck ahead of you, and baked by UV every single day. The paint on a Ranger tailgate is the same thickness as any other panel — sometimes thinner where it stamps around the badging — and once it's chipped or scratched, you're looking at touch-up paint that never quite matches or a several-hundred-dollar respray. A vinyl tailgate decal acts as a sacrificial layer. Take the hit on the vinyl, peel it off later, keep the paint underneath untouched.
It's also the cheapest styling upgrade you can make to a Ranger. A full PPF tailgate kit runs into hundreds of dollars; a tonneau cover is more again. This decal lands at $36.99 and changes the entire look of the rear of your truck. If you like the idea of layered protection, you can pair this with full-body paint protection film from our PPF Kits collection or check out what's moving in our Best Sellers to round out the build.
What's Included & Installation
You get the pre-cut tailgate decal sized for the Ford Ranger, ready to apply. The kit ships flat and rolled, so it arrives without creases or bend marks. Installation is straightforward: wash and degrease the tailgate thoroughly (no wax residue), let it dry, then use a slip solution of water and a drop of dish soap to float the decal into position. Squeegee out from the center, work the air bubbles to the edges, and let it cure for 24 hours before driving in heavy rain. Total install time is usually under an hour for a careful first-timer.
If you'd rather have it done right the first time, any local wrap or vinyl shop can install this in well under an hour for a small labor fee — bring it in with the package sealed and you're rolling out the same day.
Frequently Asked Questions
Will this decal fit my specific Ranger model year?
Yes. This decal is designed to fit Ford Ranger trucks across all model years and trims. The 61" x 13" sizing covers the tailgate area cleanly on the modern Ranger generations.
How long does the vinyl last outdoors?
With proper installation on a clean surface, the UV-resistant PVC vinyl typically holds up for 4–6 years of daily outdoor exposure before showing any fade. Garage-kept trucks see even longer life. Avoid pressure-washing the edges directly during the first week after install.
Can I remove it later without damaging the paint?
Yes. The decal is fully removable. Warm the vinyl with a heat gun or hair dryer and peel slowly at a low angle. Any light adhesive residue cleans off with adhesive remover or a citrus-based cleaner. Your factory paint stays intact — which is also why so many Ranger owners use vinyl as a temporary styling option.
More Ford & Truck Decals Worth a Look
Building out the full look of your Ranger? Check these out:
Hood Stripe Decal for Ford F-150 / Ranger Raptor — Pair your tailgate graphic with a matching hood stripe for a complete front-to-back style upgrade. Order Here
Splash Grunge Body Side Decal for Toyota Tundra — Got a Tundra in the family too? Three-piece body side kit in the same matte vinyl quality. Order Here
Back Door & Side Decal for Dodge RAM 1500 / 2500 — For the RAM owners — custom HEMI-style graphics for the rear and sides. Order