Ford Super Duty Door Side Stripe Decals | F-250/F-350/F-450 Vinyl 2-Pack
Your Ford Super Duty already looks tough — but does it look like yours? Stock Super Duties roll off the lot by the thousands, and if you've ever stood in a job site parking lot or a tailgate, you know the feeling: every other F-250 looks identical. The fix isn't a $5,000 wheel-and-tire package. It's a clean, full-length door stripe that gives your truck a custom, factory-style identity in under an hour.
This 2-piece door side decal set is cut specifically for the long door panels of the F-250, F-350, and F-450 — running over 10 feet per side to give your Super Duty the visual stretch it deserves.
Order Now →
What Is the Ford Super Duty Door Side Body Stripe Decal?
This is a 2-piece, full-length vinyl stripe kit engineered specifically for the door and lower body panels of the Ford Super Duty platform — F-250, F-350, and F-450. Each panel measures approximately 120.1 inches long by 6.3 inches wide, so it traces the natural body line of the truck from front fender through the rear door area without awkward gaps or stretching.
The graphic is cut from premium PVC vinyl with a UV-stable, weatherproof topcoat. That means it holds its color through Texas summers, Midwest winters, and high-pressure car washes without fading, peeling, or cracking. Because it's cut to fit Super Duty body lines specifically — not a generic universal strip — the alignment is clean and the install is dramatically easier than trimming raw vinyl rolls.
Key Benefits
- Vehicle-specific fitment — designed for the F-250, F-350, and F-450 door and lower body geometry, not a one-size-fits-all sticker.
- Full 120.1" length per side — covers the entire door span for a true OEM-style look.
- UV-stable PVC vinyl — resists fading, yellowing, and cracking from sun exposure.
- Weatherproof and wash-safe — holds up to rain, snow, salt, and routine pressure washing.
- DIY-friendly install — pre-cut shapes mean no measuring, no trimming, no guesswork.
- Removable without paint damage — peels cleanly when you're ready for a new look or resale prep.
Why Your Ford Super Duty Deserves This Upgrade
Super Duties earn their keep. Whether you're towing a fifth-wheel, hauling tools, or running gravel access roads, the lower door panels take constant abuse — rock chips from the front tires, grit from cattle gates, hose-down sessions after a long day. A vinyl door stripe doesn't just style the truck; it adds a sacrificial layer over a high-impact zone, helping shield your factory paint from the daily nicks that age a truck fast.
Pair this stripe with a quality clear bra or PPF kit on the leading edges and you've covered the two areas that hurt resale value most: lower body abrasion and front-end chipping. Browse our full PPF kits collection for paint protection film options, or check out our complete vehicle decals lineup if you want to keep building out the look.
What's Included & Installation
You'll receive two pre-cut vinyl stripe panels — one for the driver side, one for the passenger side — ready to install. All you need from your end is a clean microfiber, isopropyl alcohol (50/50 with water works great), a squeegee or hard plastic card, and about 45–60 minutes of patience.
Quick install overview: thoroughly clean the door panels, dry completely, dry-fit the decal with masking tape to confirm position, peel the backing slowly, lay from one end working outward with the squeegee to push out air bubbles, then warm gently with a hair dryer to seal the edges. If you'd rather skip the prep work, any local wrap or detail shop can install these in under an hour.
Complete Your Build
Running a Tacoma in the household too? Same vinyl quality, TRD-specific cut.
Order Here →
Aggressive claw graph