Your truck spends its life hauling, towing, and grinding through gravel — so why does the bed side still look like it rolled off the lot stock? If you want a clean, factory-style emblem that signals serious off-road intent without screaming for attention, the FX2 Off-Road rear trunk side decal is the upgrade that finishes the look. Designed to fit Ford F-Series, Toyota Hilux, and Toyota Tacoma bed panels, it's the kind of detail that makes people take a second glance in the parking lot.
Order Now →
What Is the FX2 Off-Road Rear Trunk Side Decal?
The FX2 Off-Road decal is a precision-cut PVC vinyl graphic engineered for the rear bed side panels of full-size and mid-size pickups. Measuring roughly 15.7 inches long by 4.7 inches wide per panel, the proportions are tuned to sit naturally on the broad, flat section of a truck bed — exactly where factory trim badges live. It's a logo-style sticker, not a wrap, so installation is fast and the result looks OEM.
What makes it universal is the platform-agnostic design. Ford F-Series, Toyota Hilux, and Toyota Tacoma trucks all share similar bed side geometry, and the FX2 Off-Road graphic has been sized to work cleanly across all three. Whether you're upgrading a base-trim work truck or adding character to a daily driver, it gives your rig the rugged "trail edition" identity without the dealer markup.
Key Benefits
- Universal truck fitment — works on Ford F-150, F-250, F-350, Toyota Hilux, and Toyota Tacoma bed sides
- UV and weather-resistant PVC vinyl — won't fade, peel, or crack under sun, rain, snow, or trail dust
- Factory-style proportions — 15.7" x 4.7" sizing matches the visual weight of OEM badges
- Peel-and-stick application — no special tools required, install in under 15 minutes per side
- Affordable styling upgrade — under $20 for a complete visual transformation
- Removable without paint damage — pulls clean if you ever want to revert or swap designs
Why Your Truck Deserves This Protection
Truck bed sides take more abuse than most owners realize. Highway grit, branches on tight trails, parking lot dings, and harsh UV rays all hammer that flat panel year-round. A quality vinyl decal acts as a small barrier against light surface scuffs while adding personality to the panel — and because vinyl is far cheaper to replace than respraying a bed side, it doubles as a low-cost styling shield. If you want full-panel protection, pair the decal with film from our PPF kits collection for true paint protection film coverage underneath.
Trucks like the F-150, Hilux, and Tacoma are built to work, but their resale value depends heavily on how the body holds up over time. Subtle styling decals keep the truck looking maintained and intentional, which translates to better trade-in numbers. Browse our full vehicle decals collection if you want to coordinate the FX2 look with hood stripes, tailgate graphics, or door accents for a cohesive build.
What's Included & Installation
Your order ships with a matched pair of FX2 Off-Road decals — one for each side of the bed — along with clear application instructions. Installation is straightforward: clean the panel with isopropyl alcohol, dry it completely, measure and position the decal with painter's tape, then peel the backing and apply from one edge using a squeegee or credit card to push out air bubbles. Finally, slowly remove the transfer tape at a sharp angle.
The whole process takes about 10–15 minutes per side. If you'd rather have a professional handle it, any local detail or wrap shop can install it in minutes for a small fee — and the results will look factory.
Pair It With These Truck Upgrades
Building a complete look? These decals match the FX2 aesthetic and ship from the same shop:
RAM 1500/2500 HEMI Rebel 5.7L Back Door & Side Decal — bold lettering for Dodge owners.
Order Here →
Toyota Tundra Splash Grunge 3-Piece Body Side Kit — aggressive trail styling for Tundra TRD, SR5, Limited, and Platinum.
Order Here →
Ford F-150 / Ranger Raptor Hood Stripe Decal — finish the front end with a matching racing stripe.
Order Here →
Frequently Asked Questions
Will the FX2 decal damage my truck's paint when removed?
No. The adhesive is engineered to bond strongly while still releasing cleanly. To remove, warm the decal with a hair dryer or heat gun on low and peel slowly at a 45-degree angle. Any residue wipes off with isopropyl alcohol or adhesive remover, leaving the original paint untouched.
How long will the vinyl last outside?
The PVC material is UV-stabilized and rated for several years of outdoor exposure. Real-world life depends on climate and washing habits, but most customers see 4–6 years before any noticeable fading. Avoid abrasive brush car washes — hand washing or touchless washes extend the life significantly.
Will it fit my specific model year?
Yes. Because the decal is a logo-style graphic (not a die-cut body panel), it fits virtually all model years of the Ford F-Series, Toyota Hilux, and Tacoma. As long as the bed side has roughly 16 inches of clean panel space, you're good to go. Check fitment by measuring the flat area on your bed side before applying.