Tremor Letter Decals for Ford F-150, F-250 & Raptor | Vinyl 2-Pack
Want that aggressive Tremor-trim look on your Ford truck without paying thousands extra at the dealer? Whether you're driving an F-150, F-250, or Raptor, factory styling can feel a little flat — and aftermarket badges often look cheap. Our Tremor Graphic Letter Decal 2-Pack delivers the bold, off-road-inspired text graphic you actually want, in a precision-cut vinyl that looks dealer-installed. Stick it on, step back, and let the truck speak for itself.
Order Now →
What Is the Tremor Graphic Letter Decal?
The Tremor Graphic Letter Decal is a 2-piece vinyl text graphic engineered to mimic the bold, blocky lettering Ford uses on its factory Tremor off-road package. Each set comes with two precision-cut decals — one for each side of the truck — ready to apply to the bed sides, doors, or hood depending on the look you're after.
Built from automotive-grade PVC vinyl, these decals are UV-resistant, weather-sealed, and made to handle the same abuse your truck does — rain, mud, sun, car washes, and trail dust. Unlike printed stickers that peel or fade in a season, this vinyl is engineered for multi-year outdoor performance.
Because the design is modeled specifically after Ford's Tremor styling cues, it complements F-150, F-250, and Raptor body lines without looking generic. It's the difference between "I bought a sticker" and "I think that's a factory trim."
Key Benefits
- Tremor-style lettering — modeled to match factory Ford graphics for an OEM-grade appearance
- Fits multiple Ford trucks — confirmed compatible with F-150, F-250, and Raptor body panels
- UV & weather resistant PVC vinyl — won't fade, crack, or peel under sun, rain, or snow
- Comes as a 2-pack — driver and passenger side included, no need to order twice
- DIY-friendly install — apply in under 30 minutes per side with basic tools
- Massive value — get the performance-trim look for under $20 instead of thousands at the dealer
Why Your Ford Truck Deserves This Upgrade
Ford F-150s, F-250s, and Raptors are workhorses — but they're also one of the most personalized trucks on the road. Owners spend serious money on wheels, lift kits, lights, and tuning, yet the body itself often stays bone-stock. A clean Tremor letter graphic is one of the highest-impact, lowest-cost ways to set your truck apart in a sea of identical Fords at the job site or trailhead.
There's also a practical angle: vinyl graphics actually help shield the paint underneath from UV oxidation and minor surface scuffs. If you want to take protection further, pair your decals with a full PPF kit for clear bra coverage on high-impact zones, or check out our full vehicle decal collection for matching accents that pull the whole build together.
What's Included & Installation
Each order includes two (2) Tremor letter decals — one for the driver side and one for the passenger side — pre-cut and ready to apply. You'll need a clean microfiber, isopropyl alcohol (70%+), a squeegee or credit card, and ideally a friend to help line things up.
Quick install steps: clean the surface thoroughly, dry it, position the decal with masking tape, peel the backing slowly while squeegeeing from the center out, then carefully remove the transfer tape at a sharp angle. Total time is roughly 20–30 minutes per side once you're comfortable.
Not confident with DIY? Any local detail or wrap shop can install these in under an hour for a small fee — and the finished result will look factory.
Complete Your Build
Pair these full-length door stripes with your Tremor letters for a complete factory-style body kit on F-250 and Super Duty builds.
Order Here →
Got more than one truck in the driveway? This TRD Sport bed graphic delivers the same premium v