Claw Style Bed Side Decals for Toyota Tundra TRD | 2-Pack Vinyl Graphics
Tired of your Tundra TRD looking just like every other truck rolling off the lot? Stock side panels are a blank canvas — and on a truck this aggressive, blank is a missed opportunity. Our Claw Style Bed Side Decal kit gives your Toyota Tundra TRD the raw, ripped-metal look it was built for, with bold claw graphics that span the full bed panel on both sides. Easy to install, weather-resistant, and priced to move at $18.99 for the pair.
Order Now →
What Is the Claw Style Truck Bed Side Decal for Toyota Tundra TRD?
This is a 2-piece precision-cut vinyl decal kit designed to mount on the bed side panels of your Toyota Tundra TRD — one for the driver side, one for the passenger side. The graphic is a stylized "claw" or scratch design, oversized and aggressive, intended to look like something tore through the steel and revealed the savage truck underneath.
Unlike generic universal stickers, this design is shaped and scaled for the Tundra TRD's body lines. The claw runs the length of the bed, following the contour and hitting that visual sweet spot between rear wheel well and tailgate. It's printed on UV- and weather-resistant PVC vinyl, so it won't fade, peel, or crack after the first rainy season.
For Tundra owners who already invested in the TRD trim, this is the finishing touch — a styling upgrade that costs less than a tank of gas but delivers the kind of curb presence you'd expect from a full custom shop build.
Key Benefits
- Tundra TRD-specific fit — sized and shaped to follow the bed panel contours, no awkward trimming or guesswork.
- Durable PVC vinyl — UV-stable and weather-resistant, holds up to sun, rain, snow, and car washes.
- Bold claw graphic — oversized, aggressive design that transforms a stock bed side into a head-turner.
- 2-piece kit — matched driver and passenger decals, mirrored for symmetrical install.
- DIY-friendly application — no special tools required, install in under an hour with basic prep.
- Affordable styling — under $20 for a transformation that looks like a custom shop job.
Why Your Toyota Tundra TRD Deserves This Upgrade
The Tundra TRD is a working truck with attitude — built for hauling, towing, and tackling terrain most crossovers wouldn't dare approach. But factory paint, no matter how good, is just paint. It scratches. It fades. And the wide, flat bed side panels are some of the most exposed real estate on the vehicle, vulnerable to flying gravel, branch scrapes, and parking lot dings. A bold vinyl decal doesn't just add style — it also acts as a sacrificial layer over the most chip-prone area of your truck.
If you take styling and protection seriously, this is one piece of a bigger picture. Pair the claw decal with paint protection film on your hood and fenders, or browse our full vehicle decals collection and best sellers to keep your Tundra looking like it belongs on a job site and a show floor at the same time.
What's Included & Installation
The kit ships with two pre-cut claw decals — one for each side of your Tundra's bed — packaged flat to prevent creasing. Installation is straightforward: clean the panel thoroughly with isopropyl alcohol, dry completely, peel the backing, position carefully (painter's tape helps with alignment), then squeegee from the center outward to push out air bubbles. Use a hair dryer or heat gun on low to help the vinyl conform around any subtle body contours.
The whole job takes about 30–60 minutes per side if it's your first time. If you'd rather have it done by a pro, most local detail and wrap shops can install this kit in under an hour for a small labor fee.
Complete Your Build
Running a Super Duty in the fleet too? Match its presence with bold door-side stripes built for the F-Series body.
Order Here →