Toyota Tundra Body Side Door Decal Kit | 4-Piece Matte Vinyl for TRD, SR5, Limited & Platinum
Tired of seeing the same factory-fresh Tundra in every parking lot? Your truck works hard — hauling, towing, off-roading — and it should look as bold as it performs. A high-quality body side decal kit transforms the look of your Toyota Tundra in an afternoon, adding aggressive styling while shielding your paint from the daily abuse of gravel, grit, and UV exposure. Whether you drive a base SR or a loaded Platinum, this 4-piece matte vinyl set was designed to fit your truck precisely and elevate its presence on the road.
Order Now →
What Is the Toyota Tundra Body Side Door Decal Kit?
This is a 4-piece matte vinyl decal set engineered specifically for the body side panels and doors of the Toyota Tundra. Spanning approximately 82.7 inches long and 20.1 inches wide in total coverage, the kit follows the natural body lines of the Tundra to deliver a clean, factory-grade aesthetic that looks like it rolled off the Toyota production line.
Unlike generic universal stripes that require trimming and guesswork, this kit is cut to match the Tundra's contours across multiple trim levels — TRD, SR, SR5, Limited, and Platinum. The matte PVC vinyl finish adds a stealthy, modern look while doubling as a thin protective layer against minor scratches, road rash, and UV fading on the panels it covers.
Think of it as part styling upgrade, part lightweight automotive protection — a smart way to personalize your Tundra without the cost or commitment of a full paint job or vehicle wrap.
Key Benefits
- Trim-specific fitment: Engineered for Tundra TRD, SR, SR5, Limited, and Platinum — no awkward overhang or short coverage.
- Premium matte PVC vinyl: UV-stable and chip-resistant, so it won't fade, peel, or yellow under harsh sun.
- Full body side coverage: 4 pieces totaling ~82.7" x 20.1" wrap your doors and side panels with cohesive styling.
- Paint preservation: Acts as a sacrificial layer against door dings, light scratches, parking lot scuffs, and road debris.
- DIY-friendly installation: Pre-cut panels mean no measuring, no template guesswork — just clean, align, and apply.
- Protects resale value: Keeps your factory paint in better condition over years of daily driving and weekend adventures.
Why Your Toyota Tundra Deserves This Protection
The Tundra is built for action — job sites, trailheads, gravel back roads, highway miles. But that same lifestyle is brutal on factory paint. Rocks kicked up from the truck ahead of you, branches scraping the doors on a tight trail, sand and salt grinding into the clear coat — it all adds up. Door panels and lower body sides are the most vulnerable real estate on any pickup, and once the paint is chipped or scratched, repainting a panel can run hundreds of dollars at a body shop.
A pre-cut vinyl kit like this one gives you styling and a layer of defense in one move. For Tundra owners who want even more comprehensive coverage, pair it with a clear bra on your hood and fenders — browse our full PPF kits collection to see paint protection film options. Looking for more ways to personalize your build? Check out our complete vehicle decals lineup for fitments across every trim.
What's Included & Installation
Your kit arrives with all 4 pre-cut matte vinyl decals — two for the driver side and two for the passenger side — ready to apply directly to your Tundra. Installation is straightforward for anyone comfortable with basic detailing work:
- Wash the body panels thoroughly and decontaminate with isopropyl alcohol.
- Dry completely and work in a shaded area between 60–80°F.
- Peel the backing, align using the body line as your guide, and apply with a soft squeegee from the center outward.
- Use a heat gun or hair dryer on low heat to conform vinyl around any curves.
Most Tundra owners complete the install in 60–90 minutes. If you'd rather skip the prep work, any local vinyl installer or detail shop can apply the kit in under an hour for a small labor fee.
Complete Your Build
Got a Super Duty in the family fleet? Same premium vinyl, custom-cut for the F-250, F-350, and F-450.
Order Here →