Your Ford Ranger Raptor was built to stand out — but the factory rear bed sides? A little plain for a truck with this much attitude. If you've been looking for a clean, motorsport-inspired way to finish off your Raptor's graphic package without dropping hundreds on a custom wrap, this 2-piece rear bed side stripe decal is exactly what your truck has been missing.
Order Now →
What Is the Ford Ranger Raptor Rear Bed Side Stripe Decal?
This is a 2-piece pre-cut vinyl graphic kit designed specifically for the rear bed side panels of the Ford Ranger Raptor. Each panel measures roughly 28.3 inches long by 7.9 inches wide, giving you a clean, logo-style stripe that runs along the rear quarter of the truck bed — one for the driver side, one for the passenger side.
Unlike generic universal stripes that require trimming and guesswork, this graphic is shaped to follow the Raptor's body lines. The decals are cut from durable PVC vinyl with a UV-resistant finish, which means they hold their color through brutal sun exposure, car washes, and daily driving. Think of it as the finishing touch that pulls the rest of your Raptor's styling together — the visual equivalent of buttoning the top button on a jacket.
And because it's vehicle-specific, you're not stuck eyeballing placement. The shape and proportions match the Ranger Raptor's bed panel, so install is straightforward and the result looks factory.
Key Benefits
- Precision fitment for the Ranger Raptor — designed to follow the bed side contour on every model year.
- UV-resistant PVC vinyl — resists fading, cracking, and lifting under harsh sun and weather.
- Complete 2-piece kit — both driver and passenger sides included, no need to buy twice.
- Bold motorsport styling — clean logo-style stripe that complements existing Raptor badging.
- DIY-friendly install — no special tools required; squeegee and a steady hand get the job done.
- Affordable upgrade — at $20.99, it's one of the highest-impact-per-dollar mods you can do.
Why Your Ford Ranger Raptor Deserves This Upgrade
The Ranger Raptor is a serious truck — bigger fenders, beefier suspension, that signature grille. But the rear bed sides are largely a blank canvas, and they're also one of the most exposed areas of the truck. Rock chips from off-road runs, scratches from loading gear, faded paint from constant sun — the rear bed takes abuse that the rest of the truck doesn't. A vinyl decal here doesn't just look good; it adds a thin sacrificial layer over the paint underneath.
If you're already thinking long-term about protecting your truck's investment, this decal pairs perfectly with serious paint defense. Check out our PPF kits collection for clear bra and paint protection film options that shield the rest of your Raptor's body, or browse all vehicle decals to build out a complete custom look. The combination of pre-cut PPF and styled vinyl decals is how the best detail shops protect resale value while making a truck unmistakably yours.
What's Included & Installation
Each order ships with two pre-cut vinyl decals — one for the driver side rear bed, one for the passenger side. The vinyl is ready to apply out of the package.
Installation is straightforward. Start by washing the bed side panel thoroughly with soap and water, then wipe down with isopropyl alcohol to remove any wax, oil, or residue. Dry completely. Peel the backing slowly, align the decal along the bed line using your reference points, and press from the center outward using a squeegee or a credit card wrapped in microfiber to prevent air bubbles. Work slowly — vinyl is forgiving if you take your time, but rushing leads to creases.
If you'd rather have it done professionally, any local wrap shop or detailer can apply this kit in under an hour. For most DIYers, though, it's a satisfying weekend project.
Frequently Asked Questions
Will this decal damage my Raptor's paint when I remove it?
No. When installed on factory clear coat in good condition, the vinyl peels off cleanly. For best results during removal, warm the decal with a hair dryer or heat gun on low — this softens the adhesive and prevents any residue from being left behind.
How long will the vinyl last on my truck?
With proper installation and normal care, you can expect 3–5 years of outdoor durability before any noticeable fading. The UV-resistant PVC holds up well to sun exposure, daily washing, and weather. Avoid pressure-washing directly on the edges of the decal to maximize lifespan.
Does this fit all Ford Ranger Raptor model years?
Yes — the decal is designed to fit all model years of the Ford Ranger Raptor. The bed side proportions have stayed consistent, so the kit applies cleanly across generations.
Complete the Look
Want to take your Raptor's styling further? Pair this rear bed graphic with our Ford F-150 / Ranger Raptor Hood Stripe Decal for a head-to-tail matching look. Order Here →
Driving a different truck? We've got you covered. The Dodge RAM 1500/2500 HEMI Rebel Back Door Decal and the Toyota Tundra Splash Grunge Body Side Kit bring the same level of pre-cut precision to other popular trucks. Browse our best sellers to see what other truck owners are choosing.
Ready to Finish the Look?
For $20.99, this 2-piece Ranger Raptor rear bed stripe kit is one of the easiest, highest-impact upgrades you can make to your truck. It's vehicle