Pop the hood on most premium EVs and you'll find one detail Tesla left surprisingly bare — the brake calipers. Behind those minimalist aero wheels sit plain, factory-gray calipers that do nothing for the car's curb appeal. If you've ever parked next to a Model S Plaid with painted Brembos or seen a Model 3 Performance with branded calipers and thought, "mine should look like that," you're in the right place. Our 6-piece heat-resistant PVC caliper decal kit gives your Tesla the badge treatment without the cost (or risk) of paint and disassembly.
Order Now →
What Is the Tesla Brake Caliper Sticker Kit?
This is a 6-piece set of pre-cut, self-adhesive vinyl decals engineered specifically for Tesla brake calipers. Each sticker is die-cut to wrap cleanly across the visible face of your factory calipers — front and rear — delivering the painted-caliper look in under an hour, no wheel removal required.
The material isn't just standard vinyl. It's a high-temperature PVC built to handle the heat brake calipers generate under heavy stopping — including regen-blended panic stops and spirited canyon driving. Because it's vehicle-specific, the cut matches the contour of Tesla calipers across the Model 3, Model X, Model S, Model Y, and P100D, so you're not trimming, stretching, or guessing at fitment.
Think of it as the smart middle ground between leaving your calipers bare and committing to a full caliper paint job — same visual impact, zero downtime, fully reversible.
Key Benefits
- Tesla-specific fitment — pre-cut for Model 3, X, S, Y, and P100D calipers, no universal trimming required
- Heat-resistant PVC construction — rated to withstand the high temperatures generated during heavy braking
- 6-piece complete set — covers all four corners with extras for clean alignment
- No wheel removal needed — install through the spokes in your driveway with basic prep
- Fully reversible — peels off cleanly without damaging factory caliper finish, protecting resale value
- Instant visual upgrade — gives your Tesla a performance-tuned look at a fraction of paint cost
Why Your Tesla Deserves This Protection
Tesla owners obsess over every visual detail — from PPF on the hood to ceramic coating on the paint to aftermarket aero covers on the wheels. But the calipers? They're often the last thing to get attention, even though they're constantly visible behind those open aero designs. Bare cast-iron calipers also pick up brake dust fast, develop surface rust at the edges, and look tired within the first year of ownership. A vinyl caliper decal does double duty — it hides that wear and gives the wheels visual depth they were missing from the factory.
If you're already invested in keeping your Tesla looking sharp, this is one of the highest-impact, lowest-cost upgrades you can make. Pair it with clear bra coverage from our PPF kit collection for full front-end paint protection, or explore our brake caliper decals collection if you're shopping for another vehicle in the garage. Small details add up — and on a Tesla, the details are what separate a stock car from a clean build.
What's Included & Installation
The kit ships with all 6 PVC decals, pre-cut and ready to apply. Installation is straightforward:
- Turn the wheel full-lock to expose the front caliper face
- Clean the caliper surface thoroughly with isopropyl alcohol and let it dry
- Peel the backing, align the decal to the caliper edge, and press from center outward
- Use a soft squeegee or microfiber to work out any air bubbles
- Repeat on all four corners — total install time is typically 30–60 minutes
If you'd rather hand the job to a pro, any local detailer or vinyl wrap shop can install the kit in well under an hour. Want to keep browsing? Check out our best sellers for more proven upgrades, or explore the full vehicle decals collection.
Frequently Asked Questions
Will these stickers melt or peel off from brake heat?
No. These are heat-resistant PVC decals specifically formulated for brake caliper applications. They handle the temperature range generated by normal and aggressive driving without warping, bubbling, or releasing. Regen braking in Teslas actually generates less friction heat than ICE vehicles in most conditions, making this an ideal application.
Do I need to remove the wheels to install them?
No — that's one of the biggest advantages over caliper paint. Simply turn the steering wheel to full lock to access the front calipers, and reach through the wheel spokes for the rears. As long as you can clean the caliper face and reach it with both hands, you can install the decal.
Will the decals damage my calipers or void any Tesla warranty?
No. The adhesive is designed to peel cleanly off the factory caliper surface, leaving no residue behind when removed properly. Because nothing about the brake system is modified, drilled, or disassembled, there's no impact on your Tesla warranty.
Give Your Tesla the Finish It Deserves
For under thirty bucks and an hour of your Saturday, you can transform the look of your Tesla's wheels with a detail most owners never bother with — and that's exactly why it stands out. Heat-resistant PVC, Tesla-specific fitment, no wheel removal, fully reversible. It's the easiest visual upgrade in the Tesla mod world, and it pairs perfectly with any PPF, ceramic, or wheel upgrade you've already done. Stop letting factory-gray calipers drag down the look of an otherwise dialed-in build.
Order Your Kit Today →