Motorcycle Tank Grip Pads: Checking Shape and Knee Contact
Tank grip pads need to sit where your knees naturally meet the tank. Choosing them by motorcycle brand alone can leave the textured patch too high, too low or across a sharp body crease. Start with shape and contact position when considering this textured rubber tank-pad pair.

Make a paper template
The supplier diagram marks a 9.65-inch long diagonal, a 6.1-inch upper edge and a 4.72-inch lower edge. These are measurements of a shaped pad, not the sides of a rectangle. Use the pictured outline to make a rough template and check both tank sides before ordering.
Find the natural contact area
With the motorcycle safely supported and the engine off, check where your riding position places your knees. The pad should cover useful contact area without forcing an awkward posture. Confirm that the whole adhesive surface can lie against the tank without bridging a sharp curve or panel gap.
Choose the appearance
The pair is offered in transparent white, black and black with colored accents. Use the selected variant photos to compare the finish. The raised-dot surface is the functional texture; a particular color does not establish stronger grip or a handling advantage.
Apply and inspect
Start with a clean, dry, sound surface and follow the supplied adhesive directions. Dry-position both pads before removing the liners. Leave warnings, service access and any required labels visible. Avoid trapping dirt under an edge, and check for lifting after installation and during routine cleaning.
These pads are tank accessories, not crash protection. They cannot compensate for riding technique or guarantee improved control. View the tank grip pair and dimension image to decide whether the outline suits your motorcycle.

