Choosing a 43-Inch GT Wing: Trunk Fit and Bracket Clearance
A universal GT wing needs more than the right overall width. The mounting feet must sit on a suitable part of the trunk, the underside must be accessible, and the lid must still open without interference. Use these checks before choosing the 43.3-inch aluminum rear spoiler.

Measure the mounting footprint first
The supplier specifies roughly 21.7 inches between brackets, with a tolerance of 0.4 inch. Compare that spacing with your trunk surface and its underside structure. A curved skin, hidden reinforcement, wiring or latch hardware can prevent a secure installation even when the wing looks narrow enough.
Nominal width versus overall width
This wing is sold as 43.3 inches. Its dimension diagram shows approximately 43.5 inches overall. Leave clearance around the full assembly rather than measuring only the central blade. The short version is about 8.7 inches front to back and 5.1 inches high overall.
Short or tall brackets?
Choose the profile after checking trunk opening travel, rear-window clearance and how the wing sits against the vehicle body. The short assembly weighs about 3.5 pounds; the tall version is about 6.3 pounds. Taller brackets are a styling and clearance choice, not proof of greater downforce. Review the selected variant diagram before ordering.
Plan a bolted installation
This is not a peel-and-stick spoiler. It requires drilling and secure bolting, so have an installer assess the panel and mounting position before making holes. Protect bare metal and seal penetrations using a method suitable for the vehicle. Follow the supplied instructions and check the hardware after installation.
The matte-black 6063 aluminum wing has adjustable angle hardware, but no tested vehicle-specific handling or aerodynamic improvement is promised. Compare both bracket options and the supplier dimension photos before choosing your setup.

