DIY Installation: Applying Brembo Logo Caliper Decals Step-by-Step
Upgrading your vehicle’s brake calipers with Brembo logo decals is one of the fastest and most cost-effective ways to achieve a premium, performance-inspired look—without the high cost of a full caliper replacement. These high-temperature vinyl decals are engineered to withstand extreme heat, brake dust, and harsh road conditions, making them ideal for sports cars, trucks, and luxury vehicles.
This step-by-step DIY guide will walk you through the exact installation process to help you achieve a professional finish in under an hour using basic tools.
What You’ll Need
-
Brembo high-temp caliper decal set
-
Brake cleaner or rubbing alcohol
-
Microfiber cloth
-
Masking tape (optional for alignment)
-
Tweezers or decal applicator tool (recommended)
-
Heat gun or hair dryer (optional for curing)
👉 Recommended Product:
High Temp Brembo Brake Caliper Decal Stickers – Set of 4
https://qualityprintsusa.com/products/brembo-logo-brake-caliper-high-temp-vinyl-decal-stickers-set-of-4
Step 1: Prepare the Surface
Proper preparation is critical to ensure long-term adhesion and heat resistance.
-
Remove the wheel for best caliper access (optional, but recommended).
-
Spray the caliper with brake cleaner.
-
Wipe completely dry using a microfiber cloth.
-
Inspect for brake dust or oils—any residue will prevent the decal from sticking.
Pro Tip: If you recently painted your calipers, make sure the paint is fully cured before applying decals.
Step 2: Align the Decal
-
Without removing the backing, hold the decal against the caliper to find the best position.
-
Use light masking tape to mark the centerline (optional but helpful for symmetry).
-
Confirm that the decal is level and visible through your wheel spokes.
Placement matters—centered logos create a clean, factory-style appearance.
Step 3: Apply the Decal
-
Slowly peel the backing to expose the adhesive side.
-
Gently place one edge of the decal onto the caliper surface.
-
Use your finger or a soft applicator to press down while moving across the decal.
-
Apply firm pressure across the entire surface to eliminate bubbles.
Important: Do not stretch the vinyl. Apply it with light tension to maintain shape.
Step 4: Set the Adhesive
-
Press firmly over the entire decal for 20–30 seconds.
-
If using a heat gun or hair dryer, apply low heat evenly to improve bond strength.
-
Allow the decal to fully cure for at least 12 hours before aggressive driving or washing.
Step 5: Final Inspection
Once the decals are set:
-
Ensure there are no lifted edges.
-
Check alignment by spinning the wheel slightly.
-
Reinstall wheels and torque to manufacturer specs if removed.
Your Brembo caliper decals should now have a clean, high-performance factory look that enhances the visual appeal of your vehicle.
Why Use Brembo Caliper Decals?
✔ Affordable upgrade with premium look
✔ Heat-resistant to withstand extreme conditions
✔ No tools or permanent modification required
✔ Completes the performance aesthetic of painted calipers
Ready to Upgrade Your Calipers?
Transform your vehicle in minutes with professional-grade Brembo decals engineered for durability and style.