Blog Post

Tired of your Ford F-150 Raptor blending in with every other lifted truck at the trailhead? Factory paint is tough, but it doesn't make a statement — and a Raptor was never built to whisper. If you want aggressive, head-turning styling without committing to a full custom paint job (or the $5,000+ price tag), a precision-cut vinyl body graphic kit is the smartest upgrade you can make this weekend.

What Is the Ford F-150 Raptor Splash Grunge Body Side Graphic Kit?

This is a 3-piece, full-coverage vinyl decal set engineered specifically for the Ford F-150 Raptor's body side panels and tailgate area. Each set spans roughly 112.2 × 30.3 inches of coverage and features an aggressive splash grunge design that wraps around the Raptor's signature flared fenders and muscular profile — the kind of styling Ford's SVT team would approve of, but at a fraction of factory graphics pricing.

Unlike generic universal stickers, this kit is contoured to follow the Raptor's body lines. The premium PVC vinyl with matte film finish lays down clean, conforms to curves with heat assistance, and leaves no residue if you decide to remove it down the road. Choose from 12 finishes — Glossy Orange, Yellow, Blue, Red, White, Black, Gray; Matte Gold, Silver, Black; Carbon Fiber; or Colorful Laser — so you can match your build's personality, from stealth-black off-road rigs to high-visibility show trucks.

Think of it as a vinyl wrap section without the wrap shop bill. You get bold custom graphics, paint protection underneath the film, and total reversibility — all for $199.99.

Key Benefits

• Raptor-specific fitment: Designed to follow the F-150 Raptor's body lines, fender flares, and tailgate proportions — not a generic shape forced onto your truck.
• 12 premium finish options: From matte black stealth to carbon fiber texture to glossy show-truck colors — pick the look that defines your build.
• Premium PVC vinyl construction: Matte film finish resists UV fading, road grime, car washes, and minor abrasion — built to survive the same trails your Raptor was made for.
• No drilling, no permanent mods: Pure adhesive application means zero damage to factory paint and full reversibility — a win for resale value.
• DIY-friendly install: Three manageable pieces instead of one giant wrap. With a squeegee, heat gun, and patience, you can knock it out in an afternoon.
• Light paint protection bonus: The vinyl layer shields the underlying clear coat from rock chips, bug acid, and UV oxidation on the panels it covers.

Why Your Ford F-150 Raptor Deserves This Protection

The Raptor lives a harder life than most trucks. Whoops, gravel, desert sand, mud bogs, and highway pelting at 100+ mph all chip away at your factory clear coat. Those body side panels — the widest, most exposed real estate on the truck — take constant abuse from kicked-up debris off the BFGoodrich KO2s. A vinyl graphic kit adds a sacrificial layer over your most vulnerable panels, so the damage hits the decal, not your paint.

UV exposure is the other silent killer. Raptors in Texas, Arizona, California, and Florida bake under harsh sun that fades and oxidizes factory paint within a few seasons. The matte film vinyl reflects and resists UV degradation, keeping the panels underneath in showroom condition. For full-panel coverage, check out our complete PPF kits collection, or browse all vehicle decals if you're building a fully customized look across your fleet.

What's Included & Installation

Your order includes a 3-piece body side vinyl decal set sized for full Raptor coverage (approx. 112.2 × 30.3 inches total), in your chosen finish from the 12 available options. The graphics are pre-cut and ready for direct application — no trimming required.

Installation is straightforward but worth doing right. Wash the truck thoroughly, then clean the application panels with isopropyl alcohol to strip wax and silicone. Work in a shaded, dust-free area between 60–80°F. Apply piece by piece, front to rear, using a squeegee to push out air bubbles from the center outward. A heat gun (low setting) helps the vinyl conform around curves and lock into compound angles. Take your time — rushing is the #1 cause of bubbles and lifting edges.

If you'd rather hand it off, any local wrap shop or detail studio can install this kit in 2–3 hours. Bring our pre-cut kit and you'll save significantly versus custom-cut shop vinyl.

Complete Your Build

Browse our full collection: Best Sellers, Brake Caliper Decals, and All Vehicle Decals.

Frequently Asked Questions

Will this kit damage my Raptor's factory paint when I remove it?

No. This is a high-quality adhesive vinyl designed for clean removal. As long as your factory paint is in good condition and the decal hasn't been baking on for 5+ years, it peels off cleanly. A little heat from a hair dryer makes removal even easier, and any minor adhesive residue wipes off with isopropyl alcohol or adhesive remover.

Can I install this myself, or do I need a pro?

Most truck owners with patience and basic tools (squeegee, microfiber cloth, isopropyl