Your Raptor was built to chew through dirt, sand, and rock — but the factory side panels look almost too clean for the kind of trails you actually run. Want to give your truck a body-side graphic that matches the attitude under the hood without spending thousands on a custom wrap? The Mudslinger Side Door & Trunk Decal for the Ford F-150 Raptor delivers exactly that — an aggressive, mud-splatter-inspired graphic in durable matte vinyl, designed to bolt onto your truck's body lines like it came from the factory.
Order Now →
What Is the Mudslinger Side Door & Trunk Graphic Decal?
This is a precision-cut, mudslinger-style side body graphic designed specifically for the Ford F-150 Raptor. Each panel runs approximately 70.9 inches long by 16.1 inches wide, covering the full length of the door and trunk side from the front fender taper all the way to the rear bedside. The pattern mimics the look of dried mud kicked up from the tires — bold, organic, and aggressive — but rendered in a clean matte finish that reads as styled, not sloppy.
Made from premium matte PVC vinyl, the decal is UV-stable and chip-resistant, meaning it stands up to direct sun, gravel pings, car washes, and the occasional brush with a desert thornbush. Unlike generic universal-fit stickers, this kit is cut to follow the contour and proportions of the F-150 Raptor body, so it lays flush across your door creases and the bedside swage line without awkward trimming.
Think of it as a low-cost alternative to a full custom vinyl wrap — the same kind of visual transformation, with a fraction of the install time and zero shop labor if you handle it yourself.
Key Benefits
- Raptor-specific fitment — designed to follow the F-150 Raptor's body lines across all generations, not a one-size-fits-all sticker.
- Matte PVC vinyl construction — premium thickness with a non-reflective finish that hides minor surface imperfections.
- UV and chip resistant — colorfast under desert sun and tough enough to shrug off trail debris.
- Full-length coverage — 70.9 in. L x 16.1 in. W panels span door and trunk side for one continuous look.
- DIY-friendly install — peel, position, squeegee. No paint prep, no body shop, no permanent modification.
- Resale-safe — cleanly removable if you ever want to return the truck to stock for sale or trade.
Why Your F-150 Raptor Deserves This Protection
The Raptor's flat door panels and wide bedsides are some of the largest, most exposed real estate on any truck. They take constant abuse — rock chips from your own tires, sun-bleached fade lines around the trim, and scratches from off-road brush. Adding a thick matte vinyl graphic over those panels gives you a visual upgrade and a layer of physical buffer between your factory paint and whatever the trail throws at it.
Beyond the aesthetic, vinyl works hand-in-hand with serious paint protection strategies. A lot of Raptor owners run pre-cut PPF on the hood, fenders, and rocker panels for full clear-bra coverage, then add a styled graphic like this one to dress up the doors. If you're building out a full protection plan for your truck, check out our PPF kits collection for clear paint protection film, or browse our full vehicle decals catalog to mix and match graphics across the body.
What's Included & Installation
Your order includes two pre-cut matte vinyl panels — one for the driver side and one for the passenger side — sized to fit the door and trunk side of the Ford F-150 Raptor. Each panel arrives rolled and protected for shipping.
Installation is straightforward for anyone comfortable with vinyl work. Wash and decontaminate the panel, dry it thoroughly, and warm the surface to room temperature. Dry-fit the decal first to confirm placement along the body line, then peel the backing and apply from one end using a felt-edge squeegee to push out air bubbles. A heat gun on low helps the vinyl conform around door handles and panel gaps. Plan on about 60–90 minutes per side at a relaxed pace.
Prefer to leave it to a pro? Any local vinyl or wrap shop can install this kit in well under two hours — typically a flat-rate job that's a fraction of full-wrap pricing.
Frequently Asked Questions
Will this decal damage my factory paint when removed?
No. The matte PVC vinyl uses a pressure-sensitive adhesive designed for automotive application and removal. When you're ready to take it off, warm it gently with a heat gun and peel slowly at a low angle — your factory paint comes out clean underneath. This makes it ideal if you plan to sell or trade the truck later.
Does it fit Gen 1, Gen 2, and Gen 3 Raptors?
Yes — the kit is designed for all generations of the Ford F-150 Raptor. The graphic spans the door and trunk side panel, which share the same general proportions across model years, with minor trimming around handles or body trim as needed.
Can I use this with paint protection film underneath?
Absolutely. Many owners run a clear bra or PPF on high-impact zones (hood, fenders, rockers) and then apply styled vinyl like this Mudslinger graphic over the door and bedside areas. The two layers work together well — just make sure any PPF is fully cured (typically 1–2 weeks after install) before applying vinyl on top.
Style and Protection in One Bold Upgrade
If you want your Raptor to look as aggressive as it drives, the Mudslinger Side Door & Trunk Decal is one of the highest-impact, lowest-effort upgrades you can make. Truck-specific fitment, premium matte vinyl, full-length coverage, and a price that beats any custom wrap by hundreds of dollars. Pair it with a complementary graphic like the Raptor Hood Stripe Decal for a coordinated build, or check out similar truck graphics like the RAM 1500/2500 HEMI Rebel decal and the Toyota Tundra Splash Grunge kit in our best sellers collection. Order today and give your Raptor the trail-ready identity it was built for.