Blog Post

Your Ford F-150 already turns heads — but let's be honest, the factory bed sides can look a little plain next to a stacked Raptor or a lifted off-road build. Want that aggressive, muscular Raptor-inspired profile without dropping thousands on a full conversion? A clean set of bed stripes is the easiest, highest-impact upgrade you can make in an afternoon. Our 2-piece truck bed vinyl graphics kit delivers exactly that: OEM-quality cast vinyl, precision-cut for the F-Series, and built to survive the same daily abuse your truck already does.

What Is the Ford F-150 / Raptor Truck Bed Vinyl Graphics Set?

This is a 2-piece side stripe decal set engineered specifically for the Ford F-150 and F-150 Raptor bed panels. Each graphic is cut from premium automotive-grade cast vinyl and shaped to follow the existing body lines of the F-Series, giving your truck a factory-installed appearance rather than a generic aftermarket sticker look.

The kit covers the lower bed sides — the largest, flattest, most visible panels on the truck — transforming the side profile with a single bold accent. Because the design is tailored to F-150 geometry, you get clean edges, balanced proportions, and a finished look that complements the truck's stance whether you're rolling stock, lifted, or running a full Raptor-style conversion.

Cast vinyl is the same material category used in professional vehicle wraps and OEM accent packages. It conforms to curves, resists shrinking, and holds color far longer than cheap calendered vinyl you'll find on budget kits.

Key Benefits

• Vehicle-specific fitment — designed around the Ford F-150 and Raptor bed contours for a clean, OEM+ result
• Premium cast vinyl construction with deep color saturation that won't fade after one summer
• Weather, UV, and car-wash safe — drive it, wash it, off-road it without worrying about peeling
• Multiple finishes available including gloss black, matte black, white, silver, red, yellow, and metallic options
• Easy 2-piece installation — left and right panels, no complex multi-section alignment
• Designed and cut in the USA by Quality Prints USA for quality control on every kit

Why Your F-150 Deserves This Upgrade

The F-150 is one of the most customized trucks on the road, and for good reason — it's a blank canvas with great proportions. But factory bed panels are large, flat, and visually uninspired. Without an accent stripe or contrasting element, the side profile reads as one big slab of paint, especially on solid colors like Oxford White, Agate Black, or Iconic Silver. A well-placed stripe instantly adds dimension, motion, and aggression to the truck's stance.

Beyond aesthetics, these graphics also act as a buffer for the bed sides — the area most likely to catch parking-lot door dings, gravel kick-up from rear tires, and scuffs from loading gear. While they're not a substitute for full paint protection film, they add a sacrificial layer over high-traffic zones. Looking to take protection further? Pair these stripes with options from our PPF kits collection, or browse our best sellers for the most popular F-150 upgrades our customers are running right now.

What's Included & Installation

Each kit ships with 2 truck bed vinyl stripe decals — one for the driver side, one for the passenger side — pre-cut, ready to install, and packaged flat to prevent creasing in transit.

Installation is straightforward for anyone comfortable with vinyl work: wash and decontaminate the bed panel, wipe down with isopropyl alcohol, dry-fit the stripe with painter's tape to mark position, then peel and apply slowly using a squeegee to push out air bubbles. Plan on 45–90 minutes per side for a careful, bubble-free install. If you'd rather have it done professionally, any local wrap or vinyl shop can install these in under an hour for a small labor fee.

Complete Your Build

Pair your new bed stripes with other Quality Prints USA upgrades to round out the look of your F-150 or Raptor:

Browse our full collection: All Vehicle Decals, Best Sellers, and All PPF Kits.

Frequently Asked Questions

Will these stripes fit my year of F-150?

The kit is designed to work with modern F-150 and Raptor bed panels across recent generations. Because it's an accent stripe (not a wrap), it adapts well to multiple model years. If you have a specific year or bed length you want to confirm, message us before ordering and we'll verify fitment.

How long does the vinyl last?

Premium cast vinyl is rated for 5–7+ years of outdoor durability when properly installed and cared for. Avoid pressure washing directly at the edges, and your stripes will hold their color and adhesion through years of daily driving, sun exposure, and car washes.

Can I remove the stripes later without damaging my paint?

Yes. Cast vinyl is designed for clean removal — gentle heat from a heat gun or hair dryer softens the