Tired of your Ford Ranger or Raptor looking exactly like every other truck rolling down the highway? Factory paint is fine — but factory paint doesn't turn heads. If you want your 2015–2018 Ranger to stand out at the job site, on the trail, or in the parking lot, a full-body matte stripe kit is the fastest, most affordable way to do it. This complete decal package covers the hood, roof, side doors, and back door — a head-to-tail transformation in one box, no body shop required.
Order Now →
What Is the Full Body Stripe Vinyl Decal Kit for Ford Ranger / Raptor?
This is a complete, model-specific graphics package designed exclusively for the 2015–2018 Ford Ranger and Ranger Raptor. Unlike generic universal stripes that force you to trim, stretch, and guess your way through installation, every piece in this kit is shaped to match the body lines of your truck — the hood contours, the roof span, the door panels, and the rear tailgate.
The graphics are printed on premium matte PVC vinyl that's UV-stabilized for long-term outdoor exposure. That means no fading after a single Texas summer, no peeling at the edges after a few car washes, and no bubbling when the truck heats up in direct sun. It's a styling upgrade and a layer of light surface protection rolled into one — and it installs in an afternoon.
Key Benefits
- Vehicle-specific fitment — Pre-shaped pieces for the 2015–2018 Ford Ranger and Raptor. No universal sizing, no guesswork, no awkward overhang at the panel edges.
- Full-body coverage in one kit — Hood, roof, both side doors, and back door graphics included. You're not buying four separate decals at four separate prices.
- Matte PVC vinyl finish — Modern, aggressive look that contrasts beautifully against factory paint without the glare of glossy decals.
- UV-stable and outdoor-rated — Engineered to resist fading, cracking, and discoloration from sun exposure, rain, and temperature swings.
- DIY-friendly install — Adhesive backing applies with simple tools (squeegee, heat gun, soapy water). Most owners complete the install in 3–5 hours.
- Reversible styling upgrade — Unlike paint, vinyl can be removed cleanly when it's time to sell or change the look. Your factory paint stays untouched underneath.
Why Your Ford Ranger Deserves This Protection
The Ford Ranger and Raptor are built to be driven hard — gravel roads, job sites, weekend trails, daily commutes. But that lifestyle takes a toll on factory paint. Hoods get sandblasted by highway debris. Roofs absorb relentless UV that dulls the clear coat. Door panels collect parking lot dings and scratches from gear sliding in and out. Tailgates? They take abuse from loading, unloading, and everything in between.
A full-body vinyl graphic kit adds a sacrificial layer over the panels that take the most punishment, while transforming your truck's visual identity at the same time. For owners who want deeper, dedicated surface protection, pair this kit with options from our full PPF kit collection for impact resistance on high-strike zones. Want to see what else fits your Ford? Check out our complete vehicle decals collection for matching accent pieces.
What's Included & Installation
Your kit ships with all pre-cut matte vinyl pieces needed to cover the hood, roof, both side doors, and back door of your 2015–2018 Ford Ranger or Raptor. Each piece is rolled and protected for safe shipping.
Installation is straightforward for anyone comfortable with basic detailing work. Wash and decontaminate the panels, dry thoroughly, then apply each piece using the wet-install method (a spray bottle with water and a drop of dish soap helps you position the vinyl before squeegeeing out the air). A heat gun or hair dryer helps the vinyl conform to curved areas like the hood bulge and door contours. Take your time on edges and re-heat after positioning to lock the adhesive.
If you'd rather skip the DIY route, any local wrap shop can install this kit professionally in a few hours — most charge between $150–$300 depending on your area.
Frequently Asked Questions
Will this kit fit my 2015–2018 Ford Ranger Raptor specifically?
Yes. The kit is designed for both the standard Ford Ranger and the Ranger Raptor in model years 2015, 2016, 2017, and 2018. Each panel is pre-shaped to match those body lines exactly — no trimming required for a factory-clean fit.
How long will the matte vinyl last on my truck?
With proper installation and routine hand washing (avoid harsh automatic washes with stiff brushes), the matte PVC vinyl typically holds up 5–7 years outdoors. UV-stable formulation resists the fading and yellowing that plague cheaper decals.
Can I remove the decals later without damaging my paint?
Absolutely — that's one of the biggest advantages of vinyl over paint. Warm the edges with a heat gun and peel slowly at a low angle. Any adhesive residue cleans up with isopropyl alcohol or an adhesive remover. Your factory paint underneath stays in original condition, which actually helps protect resale value.
Related Products You'll Love
Building out the look for your truck or shopping for another vehicle in your driveway? Check these out:
Hood Stripe Style Decal for Ford F-150 / Ranger Raptor — A focused hood graphic for owners who want a cleaner, more subtle accent. Order Here →
Back Door & Side Decal for Dodge RAM 1500 / 2500 HEMI Rebel — Got a RAM in the family too? Custom-fit vinyl for HEMI Rebel models. Order Here →
Splash Grunge Body Side Decal for Toyota Tundra — Aggressive 3-piece kit for Tundra TRD, Limited, SR5, and Platinum trims.