Miata Door Bushings: Fitment Checks Before You Replace Them
Replacing the door bushings on a Mazda MX-5 Miata starts with identifying the correct part. Door-jamb bushings are different from hinge pins, door seals and suspension bushings. Before buying a replacement pair, inspect the existing bushings and compare their shape and mounting points.
Check your Miata generation and existing parts
The red Miata replacement door-bushing pair is supplier-listed for NA, NB, NC and ND MX-5 models. Compare the supplied product photos with the parts on your own car, especially if previous owners have changed the doors or fitted aftermarket hardware. A generation name alone does not confirm that every modified car retains its original mounting arrangement.
Diagnose a door problem before ordering
A rattle or difficult closure can have several causes. Check for damaged seals, loose trim, worn hinges or a latch problem before deciding that bushings are the answer. A new bushing pair will not repair a bent door or damaged latch. Have a technician inspect a door that sags, binds or does not latch securely.
What comes with this set?
This listing contains two red replacement bushings from PQY, part number CBS06-QY. Installation instructions are not included, and professional installation is recommended. Do not assume that replacement fasteners or other door hardware are included.
After installation
Before driving, check each door through its full movement and confirm normal closure, alignment and secure latching. If the new part binds, stop and have the fit checked rather than forcing the door. This product is offered as a replacement part; no measured improvement in handling or chassis stiffness is promised.