Blog Post

Your Nissan Frontier NP300 is built tough — but factory styling can leave the rear bed sides looking flat and forgettable. Want to give your truck a custom, aggressive look without dropping four figures at a body shop? The Rear Trunk Side Decal for Nissan Frontier NP300 is a 2-piece vinyl graphic kit designed to transform the rear bed panels of your truck in under an hour. Clean lines, model-specific fit, and a price that doesn't make you wince.

What Is the Rear Trunk Side Decal for Nissan Frontier NP300?

This is a two-piece vinyl decal kit engineered specifically for the rear bed side panels of the Nissan Frontier NP300. Each panel measures roughly 47.2 inches long by 4.7 inches wide, giving you full coverage along both sides of the truck bed. The graphic is printed and cut to mirror the natural lines of the Frontier's rear bodywork — no awkward overhangs, no guesswork, no trimming with a razor blade hoping for the best.

Unlike generic universal stripes you'll find at a parts store, these decals are tailored for the NP300 platform. That vehicle-specific design matters: the Frontier's bed sides have a distinct silhouette, and a graphic that doesn't account for that just looks tacked on. This kit looks like it came from the factory — or better, like you paid a custom shop to lay it down.

The material is automotive-grade PVC vinyl with UV-resistant inks and a weather-sealed finish, so the colors won't fade after a few summers in the sun or wash out under repeated trips through the car wash.

Key Benefits

• Vehicle-specific fitment — designed for the Nissan Frontier NP300 rear bed panels, both sides included in one kit.
• Premium PVC vinyl construction — UV-resistant, weatherproof, and built to handle daily driving, rain, sun, and snow.
• Generous coverage — each decal runs approximately 47.2 in. L x 4.7 in. W, giving the rear bed a finished, intentional look.
• DIY-friendly install — no special tools required; most owners complete the install in under an hour with basic prep.
• Protects underlying paint — adds a layer between your factory clear coat and minor scuffs from cargo, brush, or trailhead debris.
• Affordable styling upgrade — at $24.99, it's a fraction of the cost of a wrap or custom paint job.

Why Your Nissan Frontier NP300 Deserves This Protection

The Frontier NP300 is a workhorse — but that means its rear bed sides take a beating most owners don't think about until it's too late. Loading lumber, gear, tools, or pulling brush past the side panels leaves micro-scratches in the clear coat. Add in highway rock chips, harsh UV, and road salt, and the rear bed quickly becomes the most damaged part of an otherwise great-looking truck. A vinyl decal of this size creates a sacrificial layer that absorbs the abuse so your paint doesn't have to.

There's also the resale angle. Clean, undamaged bed sides hold value at trade-in time. And if you're the kind of owner who's already invested in paint protection film and PPF kits for the hood and rocker panels, this is the missing piece for the back half of the truck. Pair it with other graphics from our full vehicle decal collection to build a cohesive, custom-styled rig that stands out at every stoplight.

What's Included & Installation

Your kit includes two precision-cut vinyl decals — one for the driver-side rear bed panel and one for the passenger side. Installation is straightforward: thoroughly clean the application area with isopropyl alcohol, dry it completely, peel the backing, position the decal, and squeegee from the center outward to push out any air bubbles. Warm weather (around 60–75°F) makes the vinyl more pliable and forgiving for first-time installers.

If you'd rather hand it off, most local detail or wrap shops will install a pre-cut decal kit like this for a small labor fee — usually under an hour of shop time. Either way, the result is a clean, professional finish that looks miles better than the factory bed sides.

Frequently Asked Questions

Will this decal fit my year of Nissan Frontier NP300?

Yes — this kit is designed for the Nissan Frontier NP300 platform. Because the rear bed side panels share the same dimensions across NP300 model years, the decals will fit properly on all standard NP300 configurations. If you have a heavily modified bed or aftermarket flares, double-check measurements against the 47.2 in. x 4.7 in. dimensions before ordering.

How long will the vinyl last on my truck?

With proper installation and care, the PVC vinyl typically lasts 3–5 years of outdoor exposure before any noticeable fading. Hand-washing rather than running through abrasive automatic car washes, and avoiding pressure washers directly on decal edges, will significantly extend its life. UV-resistant inks help it hold color even in hot, sunny climates.

Can I remove the decal later without damaging my paint?

Yes. Vinyl decals are designed to be removable. Warm the decal with a heat gun or hair dryer on low to soften the adhesive, then peel slowly at a low angle. Any residual adhesive cleans up easily with a citrus-based adhesive remover. Your factory paint underneath stays intact — in fact, it'll likely be in better shape than the surrounding panels because it was protected.

Finish the Look — Order Your Kit Today

For $24.99, you're getting a model-specific, UV-resistant, weather-sealed vinyl graphic kit that protects your Frontier NP300's rear bed sides while giving it a custom, aggressive appearance. No body shop quote, no week-long install, no guesswork on fitment. Just clean graphics designed for your truck, ready to ship. If you're styling a different rig, check out our best-selling decals and graphic kits to see what's working for other truck owners right now.

You May Also Like