Pro-4X Rear Bed Side Decal for Nissan Navara Warrior / SL / ST — Bold Vinyl Truck Graphic
Wish your Nissan Navara had the same rugged, off-road attitude as the factory Pro-4X trim — without paying for a trim upgrade? You're not alone. Thousands of Navara Warrior, SL, and ST owners want that bold, aggressive graphic down the bed side, and they want it to look factory-fresh, not like a cheap eBay sticker peeling at the corners. That's exactly what this decal solves: premium PVC vinyl, precision cut, designed to fit your truck and survive years of sun, rain, and dust.
Order Now →
What Is the Pro-4X Rear Bed Side Decal for Nissan Navara?
The Pro-4X Rear Bed Side Decal is a high-grade vinyl truck graphic engineered to fit the rear bed/trunk side panels of the Nissan Navara Warrior, SL, and ST. It's the same bold "Pro-4X" style graphic Nissan uses on its top-trim off-road models — adapted, scaled, and pre-cut specifically for the Navara body line so the placement looks intentional and OEM, not aftermarket.
Because every Navara has subtle differences in panel curvature and bed-side dimensions, generic universal-fit decals usually look off. This kit is contoured to the Navara's bed side, so the graphic flows naturally with the body crease and door lines. It's not just a sticker — it's a styling upgrade that gives your truck a meaner, more capable presence the moment it's applied.
Key Benefits
- Vehicle-specific fitment — designed for Nissan Navara Warrior, SL, and ST bed side panels (not a generic shape).
- Durable PVC vinyl — UV-resistant and weather-resistant, built to handle harsh sun, rain, mud, and daily wash cycles.
- Multiple colorways — choose the finish that complements your paint, from subtle matte tones to bold contrast colors.
- Pre-cut and ready to apply — no trimming, no guesswork. Peel, position, squeegee, done.
- Non-damaging adhesive — sticks firmly during use but removes cleanly later without harming your factory paint.
- Instant style upgrade — adds Pro-4X attitude to lower trims for a fraction of the cost of a re-spray or trim swap.
Why Your Nissan Navara Deserves This Upgrade
The Navara is built to work hard — towing, hauling, off-roading, daily driving. But factory bed sides on the Warrior, SL, and ST trims are visually plain compared to the top-tier Pro-4X. Worse, those flat panels take constant abuse: stone chips kicked up from the rear tires, UV bleaching, scuffs from gear sliding in and out of the bed. A quality vinyl graphic doesn't just add style; it adds a layer of visual character that hides minor wear and refreshes the look of an older truck.
If you're already investing in your Navara's appearance, it's worth thinking about the full picture — paint protection film (PPF) for high-impact zones, brake caliper decals for a finished wheel-well look, and styling graphics like this one to tie it all together. Browse our full vehicle decals collection or check out our best sellers for more proven upgrades truck owners love.
What's Included & Installation
Each order includes a pre-cut Pro-4X rear bed side decal set in your chosen colorway, designed to fit the Nissan Navara Warrior, SL, or ST. Installation is straightforward: clean the panel thoroughly with isopropyl alcohol, dry it, align the decal using masking tape as a hinge, peel the backing, and squeegee from the center outward to push out air bubbles. The whole process takes most DIYers around 30–45 minutes per side.
If you're not confident applying large vinyl graphics yourself, any local detail shop or vinyl installer can fit these in well under an hour — and the clean, factory-look result is worth it.
Complete Your Build
Own a Super Duty too? Match the bold bed-side styling with these factory-look door stripes.
Order Here →