Blog Post

Your Ford Raptor or Ranger was built to dominate trails, churn through mud, and turn heads at the same time. So why does it still wear the same factory paint job as every other half-ton parked at the job site? If you want your truck to look as aggressive as it drives, a stock body side just won't cut it. The Splash Grunge Body Side Decal Kit gives your Ford a custom, off-road-ready identity — without the cost of a full vinyl wrap or a custom paint job.

What Is the Splash Grunge Body Side Decal for Ford F-150 Raptor / Ranger?

This is a precision-cut, 3-piece matte vinyl decal kit designed to wrap both doors and rear quarter panels of the Ford F-150 Raptor and Ford Ranger. The splash grunge artwork features dynamic, mud-splatter-inspired graphics that echo the aggressive, dirt-slinging personality these trucks were built for. It's bold, modern, and unmistakably Raptor.

Unlike generic universal stickers, this kit is engineered specifically around the body lines of the F-150 Raptor and Ranger. The contours follow the door panels, fender flares, and bed sides for a flush, factory-grade appearance. The matte finish keeps the look stealthy and high-end — no cheap gloss shine, no peeling edges.

Beyond the aesthetics, the vinyl itself acts as a layer of automotive protection — shielding your factory paint from light scratches, sun fade, and trail debris where it sits.

Key Benefits

• Vehicle-specific fitment — pre-cut for the Ford F-150 Raptor and Ranger body lines, no trimming guesswork.
• 3-piece full body side coverage — both doors plus rear panel graphics for a complete, balanced look.
• Matte PVC vinyl — UV-stable, chip-resistant, and fade-resistant under harsh sun and weather.
• Paint protection layer — adds a sacrificial barrier against minor scratches, rock chips, and trail debris.
• DIY-friendly install — air-release adhesive prevents bubbles and allows repositioning during application.
• Preserves resale value — removable later without damaging factory paint underneath.

Why Your Ford F-150 Raptor / Ranger Deserves This Protection

Ford engineered the Raptor and Ranger for abuse — but the paint on the rocker panels and lower doors takes the worst of it. Gravel kicked up from the rear tires, mud-caked off-road sessions, branches on tight trails, and sun-baked parking lots all chip away at your finish over time. Once that paint is cracked or oxidized, touch-ups never quite match, and resale value takes a hit.

A matte vinyl decal isn't just decoration — it's a smart automotive protection move. The vinyl absorbs the abuse so your clear coat doesn't have to. Pair it with a hood graphic or, for full-coverage defense, check out our PPF kits for the ultimate clear bra protection. You can also browse our full vehicle decals collection to build out a coordinated look across your truck.

What's Included & Installation

Your kit ships with all three pre-cut matte vinyl decals — left side, right side, and rear coverage — sized specifically for the F-150 Raptor or Ranger. Installation is straightforward for anyone comfortable with vinyl work:

• Wash and degrease the application area thoroughly.
• Use a soapy water mist for wet application — this gives you time to position.
• Squeegee from the center outward to push out air and water.
• Heat-set edges with a heat gun or hair dryer for permanent adhesion.

If you'd rather hand it off to a pro, any local vinyl or detail shop can install this kit in about an hour per side. Most charge between $80–$150 for a professional application.

Frequently Asked Questions

Will this decal damage my factory paint when removed?

No. When properly installed on factory clear coat in good condition, this vinyl removes cleanly with gentle heat — no adhesive residue, no paint lift. That makes it ideal for leased trucks or owners planning to resell.

How long does the matte vinyl last outdoors?

With proper installation and routine washing (avoid pressure washing edges directly), expect 5–7 years of solid outdoor durability. The UV-stable PVC resists fading, cracking, and chalking far better than budget vinyl.

Can I install this kit at home without experience?

Yes — this is one of the more beginner-friendly kits we offer because the pieces are pre-cut and the matte finish hides minor application imperfections better than gloss vinyl. Take your time, work in a dust-free garage, and follow the wet-application method.

Related Decals You'll Love

Building a fully customized truck? These pair perfectly with the splash grunge kit:

Hood Stripe Decal for Ford F-150 / Ranger Raptor — match your body sides with an aggressive hood stripe.
Order Here →

Splash Grunge Kit for Toyota Tundra — same aggressive style, sized for Tundra TRD / SR5 / Platinum.
Order Here →

Back Door & Side Decal for Dodge RAM 1500 / 2500 HEMI Rebel — got a buddy with a RAM? Send them this one.
Order Here →

Looking for more ways to upgrade? Check out our best sellers or add some pop with